DVIA-MB Series

Active Vibration Isolation for Ultra High-Resolution SEM, TEM, FIB and FIB/SEM and other analytical instruments

DVIA-MB is the ultimate base active vibration isolation platform for ultra-high-resolution electron microscopes. With exception low-frequency isolation performance, DVIA-MB enables high-performance electron microscopes to obtain high-resolution images of both biological specimens and materials samples. The DVIA-MB reduces vibrations in the critical range of 1 – 5 Hz where the electron microscopes are incredibly susceptible to the low-frequency vibration.

Daeil DVIA-MB For an active vibration isolation platform for electron microscopes, SEM, TEM, FIB, Crossbeam, and Dual BeamsSuperior active vibration isolator

DVIA-MB achieves its outstanding performance by using four active vibration isolators that utilize both air springs and active isolation technology. The integrated sensors and actuators effectively reduce the low-frequency vibrations and start to isolate vibrations from 0.5 Hz, achieving 90% vibration isolation at 2 Hz. Simultaneously the air springs support payloads from 500 kg to 6000 kg and effectively reduces high-frequency vibrations and, moreover, lower the natural frequency.

Cutaway of a Daeil DVIA-MB For an active vibration isolation platform for electron microscopes, SEM, TEM, FIB, Crossbeam, and Dual Beams

As the images above clearly demonstrate, when low frequency vibrations disturb electron microscopes, it is critical to reduce these vibrations in order to obtain nanoscale resolution images. DVIA-MB is the best solution for nanoscale imaging.

Unbeatable vibration isolation performance

The resonant frequency of active isolation systems is much lower than that of passive isolation systems. The active component of the DVIA-MB excels in controlling vibrations in the 1-10 Hz range.  Typical passive systems amplify the low-frequency vibrations rather than filtering them. DVIA-MB is highly effective in isolating ultra-precision instruments from the low-frequency vibrations that cause disruptions and instability.  Active vibration isolation starts at 0.5 Hz, with DVIA-MB delivering 90% at 2 Hz and 99% at 10 Hz.

DVIA-MB active vibration isolation performance

Feedback & feed-forward algorithms

The DVIA-MB uses the feedback control system to continuously detect vibrations disturbing an isolated payload base and instantaneously react to minimize the vibrations in real-time. The feed-forward system is employed in the DVIA-MB to filter out floor vibrations in a predefined way.

Controlling vibrations in all six degrees of motion

Inertial sensors and electromagnetic actuators installed in the DVIA-MB active vibration isolation systems detect and control vibrations in three translational degrees of motions ( X, Y, and Z), and three rotational degrees of motions (pitch, roll, and yaw).

The DVIA-MB provides vibration-cancellation along all six degrees of freedom

On-site tuning for better performance

Vibration levels vary depending on the environment, location, vibration sources, and other factors. Therefore, VEC performs on-site tuning to guarantee the maximum performance level and your satisfaction. The engineer first conducts a site survey to measure vibration data.  VEC then analyzes and uses this data to tune the feedback and feedforward control systems to maximize vibration isolation performance.

VEC provides on-site tuning of all Daeil active vibration isolation systems to optimize performance

Specifications

Specifications for the DVIA-MB active vibration isolation system

Dedication to Quality

All Daeil systems are TUV and CE certified. VEC provides a three-year warranty on all DVIA-M products.

Daeil Vibration Isolation systems are TUV certified

Daeil Active Vibration Isolation Systems are CE Certified

 

 

 

 

 

 

 

Contact VEC for more information or to request a quotation.

Let’s Get Started

Request A Consultation

interpreting site data

Understanding the Site Survey

Sign up to receive periodic emails from VEC and receive this guide to site survey data.

Get The Report
vibration reduction for sensitive instruments